Home
Engine
ENGINE MOUNTS
Norsk


• When jacking up the engine, always make sure there is something soft between the jack and the engine, e.g. a wooden board.


Several types.

This is easy to replace. Just take off the left wheel, remove the rubber cover, and you have it right in front of you. Place a garage jack under the engine to relieve the mount.

Adjust with stop washers on the large bolt (between the engine mount and the gearbox), so that there is no tension in the mount. If the mount is clamped outwards without stop washers inserted, the lower engine mount must be adjusted.


TIGHTENING
The small bolts
3 mdaN (30 Nm)
The big bolt
16,5 mdaN (165 Nm)



Opp Valid XHTML 1.0 Transitional