Home
Electrics
INSTRUMENT CONSOLE
Norsk

Instrument console

To take out the instrument console on CX2 is relatively easy.


Make sure all the bulbs are working. Search until you find them all.


Disassembly

Instrumentkonsoll S2
  1. Unscrew the two screws on the underside (one on each side).
  2. Unscrew two screws at the top in the middle, and two at the top all the way out at the edges.
  3. Remove the top cover
  4. Remove the two screws holding the console in place.
  5. Disconnect the contacts.
  6. Use a mirror and a flat head screw driver and push the speedometer cable (the light blue thing) completely off the yellow gray end that it sits on. Pry a bit at it with a finger so that it does not get stuck at the edge.
  7. Lift out carefully.


Instrumentkonsoll Use mirror and screw driver to tilt off the speedometer cable.



Opp

Valid XHTML 1.0 Transitional