|
|
|
Front seats
Disconnect the connector to the seat heater wires. Slide the seat all the way forward and
remove the Allen screws, push it fully back and remove the last two.
Be VERY careful when you lift the seat out through the doorway! It is easy to scrape the door side.
|
|
|
You can expect the Allen screws to sit very firmly. Crawl under the car and spray rust loosener
on the screws you see and wait a while. Then cut a slot in the end of the screws
and screw them up with a flathead screwdriver (if you can manage it).
Make sure that the seat is correctly positioned (anterior or posterior position).
|
|
