How to use

Put the car on the lowest level and open the bleed screw. Drain the hydraulic fluid. Fill Hydroflush. Start and run the engine at idle 5-10 minutes to remove air bubbles. Tighten the bleed screw.

Run 1500 - 5000 km.

Put the car on the lowest level and open the bleed screw. Drain the hydroflush. Clean the tank and all the filters with gasoline (also the plastic plate on the bottom). Then blow dry with compressed air.
Fill the LHM. Start and run the engine at idle 5-10 minutes to remove air bubbles. Tighten the bleed screw. Bleed the brakes until clean LHM without air bubbles comes out.
Top up the LHM.